Perancangan Sistem Kendali dan Monitoring Tegangan Motor 3 Fasa Berbasis Internet of Things Menggunakan Aplikasi Blynk

Abstract

Internet of Things is a technological development that must be followed along with the development of the era
and revolution of the 4.0 industry today. With the Internet of Things can work more efficiently and effectively
wherever we are like CCTV monitoring process, smarthome and 3 phase motor voltage monitoring. The purpose of this
research is to control system switch on off and monitor the Internet of Things 3-phase motor voltages. This research is
an experimental study by controlling the on off control system which is controlled from the Blynk application and
monitoring the reading results of the ZMPT101B voltage sensor which measures the phase voltages R, S, and T whose
results are sent by the ESP32 module to be displayed on a smartphone using the blynk application. This research uses
the method measurement of voltage values not only relies on sensor readings, but also uses an AVOmeter with the aim
of measuring the accuracy of sensor readings. From sensor readings and AVOmeter measurements, it will be compared
to its value by knowing a percentage of error values from both measuring instruments. From the test results obtained an
average time of 12.6 seconds for control on and 15.6 seconds for control off as well results in a motor voltage error
value I phase R = 0.98%, S = 1,1%, T = 0,8% and motor II phase R = 2,1%, S = 2%, T = 1%. The average motor
voltage using the AVOmeter gauge for motor I of R = 233.1 V, S = 234 V, T = 232.5 V, motor II phase R = 233.1 V, S
= 233.6 V, T = 233 V, while the voltage sensor gauge ZMPT101B motor I average of R = 230.8 V, S = 231.4 V, T =
230.7 V, and phase II motor R = 228.2 V, S = 228.7 V, T = 230.2 V.