PERANCANGAN SISTEM PENGGERAK TRAINER TRANSMISI MANUAL 5 PERCEPATAN TOYOTA KIJANG
DOI:
https://doi.org/10.33752/reaktom.v4i2.1252Keywords:
manual transmission, trainer, pulley, v-beltAbstract
The need for learning media in the Machine Element II course makes the transmission trainer to be immediately presented in order to become a means of supporting student learning. In a transmission trainer system a driving mechanism is needed so that the transmission can rotate. The drive mechanism must be reliable to ensure the transmission can rotate without constraints. Therefore, it is necessary to design and calculate in designing the transmission driving mechanism. The purpose of this study was to determine the design and calculation of the transmission trainer drive system. The design results show that the required motor specs are motors with 250 watts of power, driven pulley diameter 50 mm, driven pulley diameter 250 mm, distance between pulley axes is 335 mm. use v-belt type A with a length of 1175 mm. this drive system mechanism will produce a final torque of 393.01 kg.mm which is considered good because it is higher than the planned torque that is 325,85 kg.mm.Downloads
Download data is not yet available.
References
[1] Wikipedia. 2019. Sistem Transmisi. [Online]. https://id.wikipedia.org/wiki/Sistem_transmisi.
[2] P. Bera, “A design method of selecting gear ratios in manual transmissions of modern passenger cars,†Mechanism and Machine Theory 132 (2019) 133–153.
[3] Wikipedia. 2019. Manual Transmission. [0nline]. https://en.wikipedia.org/wiki/Manual_transmission.
[4] M.Y. Wang, R. Manoj, and W. Zhao, “Gear rattle modelling and analysis for automotive manual transmissions,†Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2001, pp 215-241.
[5] Nazir, Moh. 2005. Metode Penelitian. Jakarta: Ghalia Indonesia
[6] Sularso, K. Suga. 1985. Dasar Perencanaan dan Pemilihan Elemen Mesin. Jakarta: Pradnya Paramita.
[2] P. Bera, “A design method of selecting gear ratios in manual transmissions of modern passenger cars,†Mechanism and Machine Theory 132 (2019) 133–153.
[3] Wikipedia. 2019. Manual Transmission. [0nline]. https://en.wikipedia.org/wiki/Manual_transmission.
[4] M.Y. Wang, R. Manoj, and W. Zhao, “Gear rattle modelling and analysis for automotive manual transmissions,†Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2001, pp 215-241.
[5] Nazir, Moh. 2005. Metode Penelitian. Jakarta: Ghalia Indonesia
[6] Sularso, K. Suga. 1985. Dasar Perencanaan dan Pemilihan Elemen Mesin. Jakarta: Pradnya Paramita.
Downloads
Published
2019-12-15
How to Cite
Mohammad Munib Rosadi, Retno Eka Pramitasari, & Ali Hasbi Ramadani. (2019). PERANCANGAN SISTEM PENGGERAK TRAINER TRANSMISI MANUAL 5 PERCEPATAN TOYOTA KIJANG. Reaktom : Rekayasa Keteknikan Dan Optimasi, 4(2), 81–84. https://doi.org/10.33752/reaktom.v4i2.1252
Issue
Section
Articles
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
