PENGENDALIAN PERSEDIAAN BAHAN BAKU TUMPI MENGGUNAKAN METODE ECONOMIC ORDER QUANTITY (EOQ) DAN METODE PERIOD ORDER QUANTITY (POQ) DI UD. JAYA ABADI SOLUTION

  • Erik Suyanto
  • Andhika Mayasari Universitas Hasyim Asy'ari
  • Nur Kholis Universitas Hasyim Asy'ari
Keywords: Economic Order Quantity, Period Order Quantity, Different Cost

Abstract

The controlling planning of raw material needs in a company is very important to keep productivity on production activityand its influence on the material procurement cost. UD. Jaya Abadi Solution is one of the company that produces various fodder from the waste of animal feed manufacturing factory. The fluctuation often happens in raw material availability for production process especially “tumpi” raw materialwhich causes the production process is not optimal. The purpose of the research is to control “tumpi” raw material availability by using Economic Order Quantity (EOQ) method and Period Order Quantity (POQ) methodand to know the different cost between the company calculation and EOQ and POQ methods caculations. The methods used in this research are Economic Order Quantity (EOQ) method and Period Order Quantity (POQ) method, these methods are expected to be able to cope the fluctuation of the “tumpi” raw material availability. Based on the result of the research using Economic Order Quantity (EOQ) method and Period Order Quantity (POQ) method yielded is EOQ value of 220 tons with total cost of Rp. 113.165.509, while POQ value is 205 tons with the total cost of Rp. 113.285.546. The different cost produced is 19 % compared to the company total cost.

References

Fithri, Prima & Sindikia, Annise. 2014. “Pengendalian Persediaan Pozzolan di PT. Semen Padang”. Jurnal Teknik Industri. Padang: Fakultas Teknik Universitas Andalas. http://repo.unand.ac.id/4588/6/Pengendalian%20Persediaan%20Pozzolan%20di%20PT%20Semen%20Padang.pdf. Diakses pada tanggal 6 Maret 2018.

Gaspersz, Vincent. 1998. “Production Planning and Inventory Control”. Jakarta: PT. Gramedia Pustaka Utama.

Ghani, S. R. (2016). Analisa Potensi Sampah Kampus Berbasis Pemodelan Maket di Gedung B Unhasy. Rekayasa Keteknikan dan Optimasi 1 (1) | vol: | issue : |.

Ghani, S. R. (2011). Analisis Perbaikan UKM X Dengan Pendekatan Lean Manufacture Guna Mereduksi Waste di Lantai Produksi Alumunium. Rekayasa 4 (2) | vol: | issue : | , 119-124.

Ghani, S. R. (2011). Identitas Kerusakan Sarana dan Prasarana Dengan FMEA Guna Mengetahui Nilai Resiko dan Merencanakan Perawatan yang Optimal. Sistem 7 (1) | vol: | issue : | .

Ghani, S. R. (2017). Pattern Analysis of Cluster and Market Orientation (Religious Tour Area of Gus Dur's Grave). Proceedings of the International Conference on Green Technology 1 (1), | vol: | issue : | , 8-16.

Ghani, S. R. (2017). Perancangan dan Pengembangan Produk Alat Potong Sol Sandal. Teknika: Engineering and Sains Journal 1 (1), | vol: | issue : | , 73-76.

Handoko, T. Hani.1984. “Dasar-Dasar Manajemen Produksi dan Operasi”. Yogyakarta: Penerbit BPFE-Yogyakarta.

Heizer, J. & Render, B. 2010. “Manajemen Operasi”. Jakarta: Penerbit Salemba Empat.

Maharani, Mayora Hayundra. 2015. “Perbandingan Sistem Economic Order Quantity dan Just In Time Pada Pengendalian Persediaan Bahan Baku (Studi Kasus Pada CV. Aneka Ilmu Semarang)”. Laporan Skripsi. Semarang: Fakultas Ekonomika dan Bisnis Universitas Diponegoro. http://eprints.undip.ac.id/45671/1/11_MAHARANI.pdf. Diakses pada tanggal 12 Maret 2018.

Murty, Dita Harry. 2015. “Optimasi Pengendalian Persediaan Bahan Baku di PT. Bromindo Mekar Mitra”. Laporan Tugas Akhir. Semarang: Fakultas Teknik Universitas Dian Nuswantoro. http://mahasiswa.dinus.ac.id/docs/skripsi/lengkap/16243.pdf. Diakses pada tanggal 28 Februari 2018.

Nasution, Arman Hakim.2003. “Perencanaan dan Pengendalian Produksi”. Surabaya: Penerbit Guna Widya.

Ristono, Agus. 2013. “Manajemen Persediaan”. Yogakarta: Penerbit Graha Ilmu.

Sutarti, dkk. 2016. “Analisis Pengendalian Persediaan Bahan Baku Menggunakan Metode EOQ Dalam Upaya Meningkatkan Efisiensi (Studi Kasus Pada PT. Pancaran Mulia Sejati)”. Jurnal Teknologi dan Manajemen Industri, Vol. 2 No. 2, Agustus 2016. Pasca Sarjana Institut Teknologi Nasional Malang. http://ejournal.itn.ac.id/index.php/jtmi/article/download/301/242/. Diakses pada tanggal 12 maret 2018.

Wignjosoebroto, Sritomo.2003. “Pengantar Tenik dan Manajemen Industri”. Surabaya: Penerbit Guna Widya.

Yamit, Zulian. 2005. “Manajemen Persediaan”. Yogyakarta: Penerbit Ekonosia FE.VII.
Published
2019-12-15
How to Cite
Erik Suyanto, Andhika Mayasari, & Nur Kholis. (2019). PENGENDALIAN PERSEDIAAN BAHAN BAKU TUMPI MENGGUNAKAN METODE ECONOMIC ORDER QUANTITY (EOQ) DAN METODE PERIOD ORDER QUANTITY (POQ) DI UD. JAYA ABADI SOLUTION. Reaktom : Rekayasa Keteknikan Dan Optimasi, 4(2), 68-75. https://doi.org/10.33752/reaktom.v4i2.1250
Section
Articles